• Fiberglass Drywall Tape 9X9/Inch 60GSM
  • Fiberglass Drywall Tape 9X9/Inch 60GSM
  • Fiberglass Drywall Tape 9X9/Inch 60GSM
  • Fiberglass Drywall Tape 9X9/Inch 60GSM
  • Fiberglass Drywall Tape 9X9/Inch 60GSM

Fiberglass Drywall Tape 9X9/Inch 60GSM

Certification: CE, ISO
Weave Type: Leno Weaving
Fiberglass Type: C-Glass
Transport Package: Carton Packing
Specification: 5cmX20m, 5cmX45m, 5cmX90m, 5cmX153m
Trademark: CHANGYI
Samples:
US$ 1.0/Roll 1 Roll(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2011

Suppliers with verified business licenses

Basic Info.

Origin
China
HS Code
70193990
Production Capacity
30000000 M2 Per Year

Product Description

INTRODUCTION
Fiberglass self-adhesive mesh tape is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface.
It has property of easy to apply, no pre-plastering required, more environmentally-friendly job. It will not tear, shrink, stretch or bubble, while it hides joints, cracks and holes permanently.

SPECIFICATION
Product Code Yarn Tex(TEX) Density Area Weight Resin Content Tensile Strength
(Counts/25mm) G/M2 % N/50MM
Warp Weft Warp Weft     Warp Weft
CNT80-9X9 33X2 99 9±0.5 9±0.5 80 ≥28 600 800
CNT73-9X9 50x2 50 9±0.5 9±0.5 73 ≥28 800 500
CNT65-9X9 33X2 66 9±0.5 9±0.5 65 ≥28 ≥600 ≥550
CNT65-8X8 50X2 50 8±0.5 8±0.5 65 28 700 450
CNT60-8X8 33X2 66 8±0.5 8±0.5 60 ≥28 500 500
CNT50-8X8 33X2 50 8±0.5 8±0.5 50 ≥28 500 450
APPLICATION PROCEDURE
Wall must be clean and dry;
Center and apply tape over the length of the joint and pressing firmly;
Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape;
Let dry completely, then sand slightly;
Apply sufficient thin finishing coats to produce a smooth wall surface;
Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

PACKING:
Width (mm): 25mm, 35mm, 50mm, 75mm, 100mm, 150mm, 200mm, 300mm, 1000mm, etc.
Length (m): 10m, 20m, 45m, 90m, 153m
Each roll is shrink-wrapped, or to be packed in  plastic bag. Then rolls are packed into carton.

 

Send your message to this supplier

*From:
*To:
avatar Mr. Jason Wang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now