Fiberglass Geogrid

Trademark: CHANGYI
Origin: China
Customization:

Contact Supplier

Gold Member Since 2011

Suppliers with verified business licenses

Product Description

Fiberglass Geo-Grids is based on fiberglass woven cloth coated with modified asphalt polymer resin.

It was developed to address the problem of pavement cracking on highways, roads and runways, driven by a need to reduce costs for infrastructure maintenance and repair.

It is characterized by high tensile strength in axial and lateral directions, low stretch rate, alkali-resistance, high temperature-resistance, as well as convenience in construction and low price. It can be used on pitch pavement, bituminous concrete pavement and cement pavement to prevent cracks occurring and prolong pavement service life. It also can be used as a basal reinforcement material for hillsides, reservoirs, harbors, ports, water channels, seawalls, etc.

Fiberglass geo-grids have the following excellent properties

1. High tensile strength: The strength-to-weight ratio of fiberglass is greater than that of plain carbon steel. At 20oC, the ratio of its elastic modulus to that of asphalt concrete is 20: 1. Thus it is strong enough to prevent deflection cracks.

2. Low elongation: The fiberglass grid stress diagram shows as a vertical straight line, which indicates that its ability of deforming resistance is very high and its break elongation is less than 4%.

3. Creep resistance: Fiberglass grid is not subject to creep, unlike many other materials. When bearing a load for long periods, fiberglass grid will not permanently deform.

4. Chemical compatibility with surfacing materials: Fiberglass grid is coated with an inorganic sizing that makes it chemically compatible to all the materials used in surfacing mixes.

5. Wide temperature range: The melting point of fiberglass is 1000oC, while that of hot asphalt is 160oC. Therefore, fiberglass grid is unaffected by the highest temperatures experienced in road surfacing. It is also unaffected by low temperatures and retains its strength in temperatures as low as -100oC. Unlike other materials such as carbon fiber, Kevlar fiber, steel rib and plaster fiber, the elastic modulus of fiberglass is not affected by temperature change.

6. Physical and chemical stability: Fiberglass grid is treated with special inorganic sizing that makes it very resistant to physical wear and a wide range of corrosive environments created by chemical, biological and climatic changes.

7. Nesting, interlock and restraint effects: Asphalt road mix extrudes through the holes of grid, thereby forming a nesting and interlocking mechanism that restrains movement of the mix. This allows for improved loading bearing capability and greater dimensional stability. An asphalt road mix reinforced with fiberglass grid, which acts as a frame in the surfacing materials, forms a monolithic construction similar to steel reinforced concrete.

Packing: Warp Knitted Fiberglass/polyester Geogrid is wounded by 76mm diameter cardboard paper or plastic tube roll. 50m or 100m per roll, each roll per PE Sheet with label on one side.
Product Code G3030 G5050 G6060 G8080 G100100 G120120 G150150 G200200
Tensile Warp ≥ 30 ≥ 50 ≥ 60 ≥ 80 ≥ 100 ≥ 120 ≥ 150 ≥ 200
Strength
(KN) Weft ≥ 30 ≥ 50 ≥ 60 ≥ 80 ≥ 100 ≥ 120 ≥ 150 ≥ 120
Elogation Fiberglass < 4 % < 4 % < 4 % < 4 % < 4 % < 4 % < 4 % < 4 %
Polyester < 13% < 13% < 13% < 13% < 13% < 13% < 13% < 13%
Mesh size(mm) 12.7× 12.7 12.7× 12.7 12.7× 12.7 12.7× 12.7 12.7× 12.7 12.7× 12.7 12.7× 12.7 12.7× 12.7
25.4× 25.4 25.4× 25.4 25.4× 25.4 25.4× 25.4 25.4× 25.4 25.4× 25.4 25.4× 25.4 25.4× 25.4
42× 42 42× 42 42× 42 42× 42 42× 42 42× 42 42× 42 42× 42
50× 50 50× 50 50× 50 50× 50 50× 50 50× 50 50× 50 50× 50
Elastic Modulus 76 76 76 76 76 76 76 76
(Fiberglass)
Width(m) 1~6 1~6 1~6 1~6 1~6 1~6 1~6 1~6
Length(m) 50~300 50~300 50~300 50~300 50~300 50~300 50~300 50~300
Tempreture Resistant Fiberglass – 100~280 – 100~280 – 100~280 – 100~280 – 100~280 – 100~280 – 100~280 – 100~280
Polyester – 100~280 – 100~280 – 100~280 – 100~280 – 100~280 – 100~280 – 100~280 – 100~280
Resin Fiberglass 18~20 18~20 18~20 18~20 18~20 18~20 18~20 18~20
Content (%) polyester ≤ 30% ≤ 30% ≤ 30% ≤ 30% ≤ 30% ≤ 30% ≤ 30% ≤ 30%
Glue Type   Bitumen Bitumen Bitumen Bitumen Bitumen Bitumen Bitumen Bitumen
  PVC PVC PVC PVC PVC PVC PVC PVC
Fiberglass SBR SBR SBR SBR SBR SBR SBR SBR
  soakage soakage soakage soakage soakage soakage soakage soakage
Polyester PVC PVC PVC PVC PVC PVC PVC PVC
SBR SBR SBR SBR SBR SBR SBR SBR
soakage soakage soakage soakage soakage soakage soakage soakage

Send your message to this supplier

*From:
*To:
avatar Mr. Jason Wang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now